Further details are available on our Product Support page.
Please note that Anthem may change product specifications as part of ongoing research and development. Errors and omissions excepted.
The amplifier is the heart of your system, and we engineered ours to rule. Its role is absolutely crucial: to render the most delicate musical detail while possessing the pure, raw force to deliver room-shaking explosions. Truly successful sound demands clean, quiet, and stable high-current power.
The P2 and P5 reveal an elite design lineage, built for absolute authority and control. This includes multi-layered, hand-designed circuit boards with thick copper traces for superior conductivity. We employ rugged, tuned toroidal power transformers dedicated to each channel—because power supply redundancy is the key to control. Fourteen rugged bipolar output devices per channel ensure immense current delivery and effortless command into any load. Finally, a proprietary "No-Fuse" Design Strategy guarantees continuous, fail-safe performance and unwavering reliability. This is the definitive power that brings your sound to life.
Anthem Statement P Series amplifiers don’t just join your system—they take command of it. Built for brutal control, effortless dynamics, and dead-silent backgrounds, P Series turns every speaker into a heavyweight. From thunderous low end to razor-sharp detail, this is reference power with zero apologies and zero excuses.
If you’re looking for “good enough,” look elsewhere.
If you want the last word in authority, clarity, and control—this is your corner.
– Jason Thorpe, SoundStage!
We don't share circuits. By design, the P2 and P5 amplifiers are powerful, independent monoblocks. Each channel is entirely self-contained, benefiting from its own glass-epoxy circuit board, heatsink, and an independent power supply.
Since there is zero common audio path between channels, we eliminate crosstalk completely. This is not shared power; this is absolute channel isolation. The result is superb frequency-response channel matching and a musical picture that is seamless, exquisitely detailed, and presented on a multichannel soundstage that is astonishingly transparent, cohesive, and three-dimensional. This is definitive control.
The P Series are simply the cleanest, quietest amplifiers in the industry. Why? Because we treat power dedication as law. Each amplifier channel features two separate and autonomous power supplies, fed from distinct transformer windings. This is not shared power; this is stable, continuous output at maximum volume, regardless of the number of channels being driven.
While other amplifiers struggle and oscillate when driving low-impedance loads, the P2 and P5 remain perfectly stable under all conditions. If you push them into clipping, our proprietary Anti-Saturation Tracking Power Supply circuit takes over to ensure an immediate, seamless recovery.
But that's not all, the use of a regulated power supply in the driver stage actively scrubs noise—eliminating the audible hum common in lesser designs. The result is an utterly silent noise floor.
We ensure full power delivery right to your speakers with our custom-designed, oversize Gold-Plated Binding Posts. They are designed for ease of use, facilitate large speaker cable connectors, and guarantee maximum contact for a reliable signal transfer at all times.
The P2 and P5 slide effortlessly into any system with dual-input flexibility. A rear three-way switch lets you choose RCA for standard connections, XLR for professional-grade balanced input, or attenuated XLR for preamps needing reduced levels. All connections are gold-plated to ensure the cleanest, highest-quality signal transfer.
Our military-spec FR-4 circuit boards, with plated through-holes and 2-ounce copper traces, ensure superior signal flow. Extensive power and ground planes minimize noise and block stray interference, delivering a pristine path that lets the music speak for itself.
The P2 and P5 amplifiers are engineered for sustained high performance, which requires superior heat management. We incorporate more than 1,125 square inches of computer-modeled heatsink (including large serrated fins) per channel.
This massive thermal infrastructure superbly dissipates the heat generated by the high power levels, eliminating the need for noise-inducing cooling fans. A dedicated thermal sensor on each heatsink continuously monitors the safe operating temperature, ensuring performance is always sustained and utterly silent.
An amplifier’s ultimate performance is directly proportional to the number of high-quality, high-current devices in its output stage. While some manufacturers cut corners to save cost in this critical area, our designers incorporated a staggering fourteen rugged bipolar output devices per channel.
This is not an option; it is a necessity for achieving absolute authority. This commitment to hardware results in immense current held in reserve, delivering the effortless power required to handle the most complex musical crescendos and the visceral impact of cinematic thunder and explosions.
The P2 and P5 amplifiers employ a proprietary Direct-Connected design to the power supply capacitor bank. This keeps output impedance remarkably low and makes more instantaneous power available to the amplifier, resulting in audibly superior performance, even into low- or complex impedance loads.
If an output short circuit does occur, only the AC line breaker will trip—there are absolutely no fuses to replace in the signal path. Furthermore, the standby low-power supply is protected by self-resetting Positive Temperature Coefficient thermistors (PTCs). This means the circuit restores itself automatically once a tripped condition disappears, ensuring continuous reliability and eliminating downtime.
These Statement amplifiers are the definitive expression of North American engineering and build quality.
The aesthetic speaks to the authority within: a fine-grain brushed aluminum cover, extruded aluminum handles, and a heavy-gauge, low-resonance 12-AWG steel chassis—all contributing to the serious high-end weight and structural integrity.
Equipped with IEC AC female sockets and detachable, high-power 14-AWG AC power cords, the P2 and P5 are built for seamless integration and robust operation. For custom installations, rack-mounted versions can be ordered to complete the setup.
Drawing on our decades of hands-on design and innovative audio engineering, Anthem products deliver an unparalleled level of reliability and functionality. This isn't just about features; it's about a relentless focus on a superior performance-to-price ratio that sets the industry standard. This is the reason Anthem electronics are the definitive choice for audiophiles, professional musicians, and engineers worldwide.
No reviews have been added for this product.
Statement P Series
Flagship Reference 2-Channel Multi-Mono Power Amplifier with 325W per channel, Made in Canada
The Anthem Statement P2 is a flagship 2-channel multi-mono power amplifier delivering 325W per channel. Handcrafted in Canada, its independent channel design ensures exceptional clarity, control, and dynamic range, bringing music and movies to life with precision and authority.
By completing your purchase, you are agreeing
to our Terms of Service & Privacy Policy
Quick Links:
Specifications
Warranty Information
Industry Reviews
Experience the Anthem Advantage firsthand. Audition our acclaimed products exclusively through our network of authorized Anthem retailers and custom installers. Locate your nearest dealer today.
